home *** CD-ROM | disk | FTP | other *** search
- Path: bignews.shef.ac.uk!usenet
- From: ELA95CSH@shef.ac.uk (Chris)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: A1200 problem
- Date: 23 Feb 1996 16:55:24 GMT
- Organization: Electrical Eng, University of Sheffield , UK
- Message-ID: <4gkrhs$64c@bignews.shef.ac.uk>
- References: <4gkv25$74k_001@salford.ac.uk>
- NNTP-Posting-Host: pc021188.shef.ac.uk
- Mime-Version: 1.0
- Content-Type: Text/Plain; charset=US-ASCII
- X-Newsreader: WinVN 0.99.7
-
- In article <4gkv25$74k_001@salford.ac.uk>, EEG114@news.salford.ac.uk says...
-
- >I am an A1200 owner and i have a problem with my mouse port. The chip
- >wich controls this port is faulty and so when using a joystick
- >perminantly pulls down. I have recently aqquired anither amiga wich is
- >not working and want to change the chips over. Does anyone now what the
- >fault is or the chip number of the one i need to change.
-
- Swapping surface mounted chips could be difficult... (Though possible with
- much patience & care).
-
- As an aside, the IO chip might be responsible, but unlikely if nothing else
- has gone `puff`. Is "Paula" the IO chip? I'm not sure off the top of my
- head, at the moment...
-
- --
- From Christopher Handley
- Email: ela95csh@sheffield.ac.uk
- -------------------------------------------------------sig v2.05 A---------
- //Amiga A1200/`030/40MHz/4MbFast | "Amiga - Back to KickAss!" ;)
- \\/ + PowerStation (SCSI Hd & CD drive)|AB3D II,Virtual Rally,Star Fighter
- ---------------------------------------------------------------------------
-
-